 |
| Software Downloads |
|
|
Io HD Software
Io HD Driver Version 6.0 (16MB TAR archive)
(Release Date 8/19/2008)
This release provides additional format support for true progressive formats in 1080 and adds a new Stand Alone Mode of operation for using the Io HD as a converter, among other new features. This software should not be used with any other AJA product (KONA, Io, Io LA, Io LD). It is recommended for users working on Mac Pro or MacBook Pro computers.
Io HD Driver Version 5.1.2 (16MB TAR archive)
(Release Date 6/6/2008)
This release makes changes to the way FireWire communication is handled for the Io HD. Some users of OS X 10.5.3 have reported issues, such as loss of audio input when working with Io HD under OS X 10.5.3. The changes in this version are meant to address such issues. Note: This driver version has the same feature set as version 5.1.1 and is only meant to address possible issues for users working with Io HD when operating under OS X 10.5.3. This software should not be used with any other AJA product (KONA, Io, Io LA, Io LD). It is recommended for users working on Mac Pro computers.
Io/IoLA/IoLD Driver Software
The v3.0 Io/IoLA/IoLD Driver Software listed below is Leopard compatible. Please ensure that you also use the v1.2 Io Control Panel application, since the v1.1 Control Panel was not Leopard compatible.
Io Driver V3 for Io/IoLA/IoLD (13MB ZIP archive)
(Release Date 4/4/2006)
This release updates Io software to a "Universal Binary"—Apple's designation for a release that works with either PowerPC platform or the newer Intel platforms. Simply install the release as usual. The software will automatically run at peak performance for your Mac's architecture, whether PowerPC or Intel.
» Go to Io Software Archive Page for older versions
Io/IoLA/IoLD Control Panel and Firmware Software (packaged together)
Io Control Panel V1.2 with related Firmware
Please read the PDF document included in this .zip archive before using the software. It contains operating instructions and important information about the release. This version is a Universal Binary that works with both Intel and non-Intel Macs. New Firmware is required to use this version of Io Control Panel software (it is also included in the archive). This download works for Io/IoLA/IoLD models (not Io HD).
Utilities
AJA VTR Xchange Application Version 4—Universal Binary for Intel and PowerPC Macs
The application allows users to capture, playback and record video/audio to any deck that can be interfaced with AJA’s KONA 3, KONA 2, LS/LSe, LH/LHe, and Io capture/playback products. The software provides RS-422 deck control via a user-supplied cable connecting the KONA or Io and VTR. New features for this release include Multi-channel discrete audio output via new Audio Routing feature, batch capture feature, and added support for the playback of 23.98fps movie files at 29.97fps or 59.94fps. This .tar archive includes the software application, release notes, and user manual.
AJA Data Rate Calculator Application
This OS X software application calculates data rates and storage requirements for a given video size, format, and frame rate. It's great for both KONA and Io users as a resource for configuring systems and determining storage requirements.
AJA Io/IoLA/IoLD Uninstaller Application
This OS X software application removes all AJA Io drivers, software components, utilities, applications and configuration information. |
|
 |
Minimum Io HD System Requirements Hardware
• MacPro 2.66GHz “4 core” (MA356LL/A) or 2.0GHz or 3.0GHz “build-to-order”, 2GB or more system RAM
• MacPro 2.66Ghz “8 core” (MA356LL/A) or 2.0GHz or 3.0GHz “build-to-order”, 2GB or more system RAM
• MacBook Pro (2.33GHz Core 2 Duo minimum), 2GB or more of system RAM, ExpressCard/34 FireWire 800 card or ExpressCard/34 Sata Controller
• Power Mac G5 Quad 2.5GHz (M9592LL/A), 2GB or more system RAM
Notes: unlisted Macintosh G5 configurations may not provide the full functionality or features that
the Io HD in combination with the listed configurations (in this table) can provide.
Not all CPUs provide sufficient processing for native DVCProHD playback. If dropped frames occur when attempting playback of DVCProHD material when using a particular CPU, users can place the DVCProHD material on a timeline with the Apple ProRes 422 sequence settings. Additionally, if Dynamic RT reports dropped frames during playback of DVCProHD material from the Apple ProRes 422 timeline, rendering the sequence may also be required for realtime playback.
• Intel XServe Quad 2.0Ghz (MA409LL/A), 2GB or more of system RAM
Io HD Software requirements
• Mac OS X v10.4.9
• QuickTime 7.1.6 or later
• Final Cut Studio 2
Minimum Io and Io LA / LD System Requirements:
• Power Mac G4, dual 800 MHz (or single 933 MHz G4); use a minimum dual 1GHz for RT.
• For portable operation, a 17” Powerbook with dual port FireWire 800 PCMCIA card (see Frequently Asked Questions for additional information on this PowerBook configuration).
• Follow the RAM requirements specified for your Final Cut Pro system configuration in the Final Cut documentation. At least 2GB RAM is recommended.
• For storage, use 4 ATA/IDE or 4 SCSI hard drives configured as a RAID. Use OS X version 10.2.5 or newer.
Io, IoLA, IoLD Recommended System:
Power Mac dual G5 with Apple Xserve RAID for storage. OS X Panther or later is recommended.
|
 |
 |
Find Support for Your Product
|
|
Contact Support
443 Crown Point Circle
Grass Valley, CA 95945 USA
Phone: +1-530-271-3190
Fax: +1-530-274-9442
» Contact Support Form |
|
| |
|
