Minimum Io HD System Requirements Hardware
• MacPro 2.66GHz “4 core” (MA356LL/A) or 2.0GHz or 3.0GHz “build-to-order”,2GB or more system RAM
• MacPro 2.66Ghz “8 core” (MA356LL/A) or 2.0GHz or 3.0GHz “build-to-order”,2GB or more system RAM
• MacBook Pro (2.33GHz Core 2 Duo minimum), 2GB or more of system RAM, ExpressCard/34 FireWire 800 card or ExpressCard/34 Sata Controller
• Power Mac G5 Quad 2.5GHz (M9592LL/A), 2GB or more system RAM
Notes: unlisted Macintosh G5 configurations may not provide the full functionality or features that
the Io HD in combination with the listed configurations (in this table) can provide.
Not all CPUs provide sufficient processing for native DVCProHD playback. If dropped frames occur when attempting playback of DVCProHD material when using a particular CPU, users can place the DVCProHD material on a timeline with the Apple ProRes 422 sequence settings. Additionally, if Dynamic RT reports dropped frames during playback of DVCProHD material from the Apple ProRes 422 timeline, rendering the sequence may also be required for realtime playback.
• Intel XServe Quad 2.0Ghz (MA409LL/A), 2GB or more of system RAM
Io HD Software requirements
• Mac OS X v10.4.9
• QuickTime 7.1.6 or later
• Final Cut Studio 2
Minimum Io and Io LA / LD System Requirements:
• Power Mac G4, dual 800 MHz (or single 933 MHz G4); use a minimum dual 1GHz for RT.
• For portable operation, a 17” Powerbook with dual port FireWire 800 PCMCIA card (see Frequently Asked Questions for additional information on this PowerBook configuration).
• Follow the RAM requirements specified for your Final Cut Pro system configuration in the Final Cut documentation.
• For storage, use 4 ATA/IDE or 4 SCSI hard drives configured as a RAID. Use OS X version 10.2.5 or newer.
Recommended Io/IoLA/IoLD System:
Power Mac dual G5 with Apple Xserve RAID for storage. OS X Panther or later is recommended.
|
