| FS1
Universal SD/HD Audio/Video Frame Synchronizer and Converter
Featuring a flexible "everything in, everything out" architecture, the FS1 can simultaneously work with both HD and SD video—all in full 10-bit Broadcast quality video and 24-bit audio. The FS1 supports virtually any input or output, analog or digital, HD or SD. The FS-1 can up- or down-convert between SD and HD, and provide simultaneous HD and SD outputs. Cross-conversions between HD formats are also supported, with simultaneous output of both formats. For audio, the FS1 supports 8-channel AES, Balanced analog, or embedded audio with full flexibility. The FS-1 supports closed captioning and the conversion of closed captioning between SD and HD formats. The FS-1 is also network ready, supporting web-based remote control and SNMP.
Specifications
Formats
| 525i |
| 625i |
| 1080i 50/59.94/60 Hz |
| 1080psf 23.98/24 Hz |
| 720p 50/59.94/60 Hz |
Video Inputs and Outputs
| Dual SDI/HD-SDI, SMPTE 259/274/292/296 |
| HD component YPbPr/RGB (RGB output only), SMPTE-274 |
| SD component/composite/YC (S Video) |
Video A/D, D/A
| 12 bits |
| 2x oversampled (HD) |
| 4x oversampled (SD) |
Audio Inputs and Outputs
| 8 Channel Balanced Analog, 25 pin D (Tascam pinout) |
| 8 Channel AES (BNC) |
| 8 Channel SDI/HD-SDI Embedded |
Audio A/D, D/A
Audio levels
| +12dBu, +15dBu, +18dBu, +24dBu, (Full Scale Digital) |
LAN
| 10/100 auto config, auto cable crossover |
| Embedded Webserver, HTTP v1.1 |
GPI
| 2x GPI input, TTL, isolated |
| 2x GPI output, TTL, isolated |
Physical
| 1 RU, 12 inches deep, convection cooled |
Power
| 100-240 VAC, 25 watts |
| Fully Redundant, diode isolated |
|
|
